Liqui-Moly Engine Flush Plus 300Ml

$ 9.65 MRP $ 10.96 (12% off) ( Inclusive of all taxes )
International product handling charges of $ 5.48 will be applied on this product
Part Number: 2657
Brand: Liqui Moly
Origin: Aftermarket
brand

Description

Engine Flush Plus

Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended

Intended use

For cleaning and flushing out the oil circuits of gasoline and diesel engines. 300 ml sufficient for up to 6 l of motor oil. Not suitable for use on motorbikes with wet clutches!

Description

Engine Flush Plus is a specially formulated combination of additives and carrier fluid. In combination with the carrier fluid, the highly effective detergent and dispersant additives dissolve sludge and lacquer formers. All types of oil-soluble and oilinsoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics.

Properties

  • ✔ Optimal engine performance
  • ✔ Highly economical
  • ✔ Tested for turbochargers and catalytic converters
  • ✔ Does not attack common sealing materials
  • ✔ Gentle cleaning
  • ✔ Rapid cleaning
  • ✔ Suitable for diesel particulate filters
  • ✔ Simple to use without disassembly
  • ✔ Minimizes wear

Areas of application

Cleaning and flushing out the oil circuits of gasoline and diesel engines. The use of Engine Flush Plus is dependent on the degree of contamination of the oil circuit. Not suitable for use on motorbikes with wet clutches.

Application

One 300 ml can is sufficient for up to 6 liters of oil. Add Engine Flush Plus to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Engine Flush Plus is compatible with all commercially available motor oils.

 

Manufacturer ‎Liqui Moly GmbH
Brand ‎Liqui Moly
Product Dimensions ‎5.4 x 5.4 x 18.5 cm; 250 Grams
Item model number ‎2657
Manufacturer Part Number ‎2657
Volume ‎300 Millilitres
Assembly Required ‎No
Manufacturer ‎Liqui Moly GmbH
Country of Origin ‎Germany
Item Weight ‎250 g
   

Available Options

+

Share it on